3D measurement: components, tools and products
sigma3D offers professional 3D scanning services for a wide range of contract measurements in the fields of design, production and development. From paper clips to wind turbine blades - we can measure it.
State-of-the-art optical 3D measurement technology? Experienced engineering team? In-house measurement laboratory? We have everything it takes for your precise component measurement with the highest surface requirements! With every order of our 3D scanning service, efficient and fast execution is just as important to us as 100% reliable measurement results.
Because: We know that the quality of a contract measurement directly determines the quality of your work and production as well as the compliance with standards!
As a result, you receive high-resolution scan data from us with the 3D model of your completely captured component. You can analyse these directly and use them for your individual requirements. Should your object of measurement be too large for shipping, we simply fall back on our mobile 3D measuring technology.
We will be happy to help you with any questions you may have about 3D component measurement - just get in touch with us!
Your advantages at a glance:
We place the highest demands on quality and precision for all subcontracting measurements. After your object has arrived at our premises, it finds its way to our in-house measuring laboratory: Here, we have special premises equipped with the latest measuring technology. In this specialized facility, the optical measurement of components, products or machine parts is carried out by our measurement team of experienced engineers.
After the optimal measuring set-up has been set up, your object is digitally recorded with a scan camera or a scan arm, depending on its size and shape. The non-contact optical 3D measurement enables an accuracy of 0.02 to 0.2 mm. In contrast to tactile measuring, the 3D scan also allows us to completely capture free-form surfaces.
In addition, we offer you the option of mobile 3D measurement: components or machines that are too large and heavy for delivery are measured by our team directly on your premises. We would be happy to advise you personally - please contact us!
In the optical 3D measurement of components, we always capture the complete object for you in order to create a digital model. This procedure has two advantages:
Advantage 1: Versatile STL data.
You receive the digitized component from us as an STL data set, a polygonal model, which you can use with our provided viewer application. This allows you to easily analyze, process and quickly share all data with employees and partners anywhere in the world.
Advantage 2: Never measure again!
At any later point in time, you can still evaluate all those areas that did not seem relevant before the component measurement. You will never again have to spend money on a contract measurement of the object.
In addition, we can provide you with a meaningful measurement report according to your individual requirements. If the 3D scanning of components should show you defects in the component, we will be happy to support you in the analysis with our many years of experience.
Automotive - Oil duct cover
In addition to maximum precision, optical 3D measurement enables one thing above all: speed. We want you to be able to use the results of your contract measurements without long waiting times. In our measurement laboratory, we therefore combine high-performance technology with years of experience and efficient processes.
In the first step, we agree the framework parameters of the measurement with you. Then, you send us your component, we take care of the complete 3D scan service, and you receive the results from us within two to five working days of receipt!
If it is a component that you need for important production processes, we will arrange a specific measurement date with you. This reduces any downtime and the associated costs for you to an absolute minimum.
Day 1: You pack the component and send it to us.
Day 2: The component arrives at our premises by 10.00 a.m. and is handed over to our measurement laboratory for optical 3D measurement.
Day 3: You receive your object back via a retrieval order and receive the results of our wage measurement from us.
Quality Control: Waterjet Cutter & Plasma Cutter
What added value did the component measurement have for our customer? Thanks to the 3D measurement of components of his waterjet cutters and plasma cutters, our customer received complete and meaningful data for his quality control. In a so-called section analysis, he was able to evaluate each area of the trim against his target data. Based on this analysis, the cutting parameters could be adjusted quickly and in a time-saving manner. The effect: Optimal and precise cutting results.
The customer is also able to minimize the steps required to adjust the cutting parameters thanks to our 3D scanning service, thus saving valuable time and money.
What was measured? Our engineers are performing a cut contour measurement for plates from waterjet cutters and plasma cutters. The plates had a size of 60 x 30 x 3 cm - ideal for component measurement directly in our measurement laboratory.
How long did the component measurement take? After delivery and measurement setup, the plates were scanned precisely and completely within one day.
What optical measurement technology did we use? For the optical 3D measurement of the plates, our ScanArm was used to capture the complete trim. Geometric features such as drill holes and slotted holes were also measured tactilely.
Surface feedback: Packaging machines for bottles
What added value did the component measurement have for our customer? Finished bottles of washing-up liquid and shampoo are to be packed in cartons for transport and dispatch. However, our customer did not have any CAD data to be able to plan the packaging machine for the different bottles at an early stage.
With our 3D scanning service, we were able to quickly and easily scan the "components", obtain precise measurement data and generate all the necessary CAD models. This allowed our customer to plan their packaging machine virtually and eliminate the need for lengthy and costly on-site adjustments. Our service saved the customer a lot of time and money.
What was measured? The measurement of bottles for the planning of packaging machines was an order from a typical field of application for 3D measurement: mechanical engineering. With a size of only 10 x 15 cm, the bottles were easy to measure in our measuring laboratory.
How long did the component measurement take? Due to the simple shape and small size, the bottles could be scanned within one day.
What optical measurement technology did we use? We used our ScanKamera for the optical 3D measurement of the surfaces of consumer goods such as bottles.
Reverse engineering: Cast housing of a press
What added value did the component measurement have for our customers? There is often no 3D planning data for old industrial presses. This was precisely the problem faced by one of our customers who wanted to optimize his machine, including conversion measures.
After commissioning the contract measurement and the individual planning of the component measurement of the cast housing of the press, we planned an on-site appointment during the next production shutdown. Using optical 3D measurement technology combined with our many years of experience, our team was able to successfully perform the component measurement and prepare it as 3D CAD data. Our customer began planning and optimizing his measures immediately after receiving the measurement data - and was able to gain valuable new insights due to the data quality.
But that's not all: Thanks to digitization, the customer will also be able to determine dimensions in the future without having to measure again. This protects ongoing operations and ensures time savings.
What was measured? The cast housing of the press had a size of 5 x 2 x 2 meters. Due to the size, we carried out this 3D component measurement directly on site at our customer's premises by appointment. Here we needed a radius of about 3 meters around the component for the measurement setup.
How long did the component measurement take? In this case our team was on site for about two days. This was preceded by joint planning with the customer, in which we defined the optical measurement of components and areas that were to be scanned with a particularly high level of detail.
What optical measurement technology did we use? For 3D scanning of components that fall into the category of presses, as in this case, our engineers use one of our scan cameras to quickly and precisely obtain three-dimensional measurement data.
Do you have any questions on the subject of "Measuring components"? We will be happy to advise you personally and will prepare an individual offer on request.